Designed for the most common tubing diameter in HVAC, the SPIN Tools preserve copper's/aluminum's malleability while doing the flaring, avoiding cracks and leakage.
The SPIN Flaring Tools make flares with the ideal dimensions for a perfect packing, due a wider area of contact between the flare surface and the valve/tube accessory. To top that, the SPIN Flaring Tools are able to make single flares in just 5 seconds.
Cimport FSPIN300 - SPIN Flaring Set: 5 Tools (1/4", 3/8", 1/2", 5/8" , 3/4")
To perform the flaring in copper/aluminum tubing, you only need to attach the correspondent SPIN Tool into a hand drill*. As they perform their job using high temperature, due friction, no clamping tools or holders are necessary.
-
FREE SHIPPING!
-
Set of 5 Flaring Tools
-
FSPIN300 Flaring Tool Drill Bit Set With 1/4’’ 3/8’’ 1/2’’ 5/8’’ 3/4" Bits
-
5 Pieces Set with the most common HVAC tubing diameters
-
Revolutionizing system for molding tubes using heat by friction Way more surface of contact between the flare and the valve
-
Right flaring size, every single time Up to 10x faster than the conventional tools: flares in 5 seconds!
-
Preserves copper/aluminum malleability while doing the flaring, avoiding cracks and leakages
-
Creates 45° Flare Angle , use with Copper & Aluminum
Replaces / Supersedes: FSPIN-300 , 1484395631148 , 662766610550 , 366282 and Similar Flaring Tools.
NOTE: Flares made with the SPIN Tools are compatible with high pressure refrigerants, such as R410A.
Click on any of the links below to download associated documentation.
»
SPIN Flaring User Manual.pdf